Welcome to Hunan Dawning Filter System Technology Co., Ltd official website

Hunan Dawning Filter System Technology Co., Ltd

Committed water filtration system developing and producing since 2002



A free consultation WeChat
  • 单罐.jpg

Single vessel sand media filter

Reduce suspended solids-20 microns



The Filtering Process

Filtering with media filters, also known as depth filtration, is done by filtering water through a thick layer of graded particles, called the filter bed. These particles can be sand, gravel or other granular materials. The filtration degree depends on the effective size of the bedding and the water velocity through the filter. 
Raw water enters from the filter inlet (1) and percolates through the filter bed (2). Suspended materials come into contact and attach to the media particles. Clean water flows through the filtration nozzles (3) and out of the filter via the outlet valve (4). 
The gradual dirt buildup in the filter bed causes an increase in the pressure differential across the filter and when it reaches its maximum design value, a cleaning process should be performed. In automatic media filter installations a pressure differential switch senses the pressure differential and when it reaches a preset value, the self cleaning process begins.   

dmf (2).jpg

The Cleaning Process

Cleaning is done by backwashing; pressurized water flows in reverse direction - from the nozzles upwards, causing suspension of the filter bed, thus releasing the suspended matter from the bedding. The dirt particles are then washed out of the filter through the back-flush valve. In automatic media filters installations the cleaning process is done by the system's controller. When the pressure differential switch senses that the differential pressure across the system reached a pre-set value, a signal is sent to the flushing controller and the self cleaning process begins.

dmf (1).jpg

Product features

  • Complete filtration solutions; Custom designed,manual or automatic backwash systems,

  • complete with manifolds, valves and controllers

  • Modularity and flexibility, wide range of vessel types and sizes(diameter 16”-96”) suitable for many filtration applications

  • High quality corrosion resistance vessels, inside and outside spray coating.

  • High efficiency; Advanced design for perfect water distribution during filtering and backwashing

  • All filters are rated to 1.0 Mpa.The water inlet pressure should be 0.2Mpa(Min.)

  • Various connection types, meeting all international standards.

  • Meets ISO 9001 standards

Selection of data table


On-site installation

  • Sand filter installation

    Sand filter installation

  • Sand filter installation

    Sand filter installation

Share To:
 Back Back

Related products recommended

Online message ordering